Anti Pollution FFP2 Mask Asbestos , FFP2 Face Mask With Built In Sponge Strip Device
1 . Descriptions
Anti-pollution mask N95 mask, FFP2 filter 98% bacteria anti-PM2.5 protection dust pollution mask unisex outdoor (10 pcs)
Intimate design: Our modified mask has a built-in sponge strip device to enhance the seal of the mask and get closer to the face. The adjustable and soft nose clip provides a comfortable and safe seal. The hooked elastic belt is suitable for most men and women, even with glasses.
N95 mask can filter more than 95% of particles with an aerodynamic diameter of 0.075µm ± 0.02µm. The aerodynamic diameter of air bacterial and fungal spores varies mainly between 0.7-10 μm and is also within the protective range of N95 masks.
Can effectively filter and purify the inhaled abnormal odor, and help reduce the exposure level of certain inhalable microbial particulates (such as mold, anthrax, tuberculosis, etc.)
Friendly users-you don't have to worry about the size when purchasing our bicycle mask, our hypoallergenic mask can adjust the bridge of the nose and earbands to fit anyone's face and nose shape comfortably without any trouble. Good for everyone, boys, girls, men, women.
2 . Material of each layer
Outer layer : Protective needle punched cotton
Middle layde : FFP2 melt blown filter(have filter efficiency level of 94%)
Inner layer : Shaped needle punched cotton
3 . Certification
This product has been tested according to the following European Standard:
- EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
- EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.
4 . Direction for use:
1. Fit the respirator and check leak-ight ness BEFORE en ten ng the contaminated area
2. Wear the respirator for the whole duration of exposure to contaminants.
3. Use the respirator in accordance with applicable health and safety regulations.
4. Discard the respirator and replace with a new one if*the respirator is re roved while in acontaminated area*excessive clogging of the respirator causes breathing dii culty ordiscomfort*the respirator becomes damaged*(for respirators protecting against vapours-thesmell of vapours present becomes detectable.
5. Leave the contaminated area if dizziness, irritation or other distress occurs.
6. Only for single use, No maintenance necessary.Do not store and/or re-use after single use.m Discard the respirator after single use(one shift, maximum) .
7. Keep un-used respirators in their closed box and store in a dry non-contaminated areabetween+2 and+55deg.
5. Protection level
FFP2 NR provides protection against non-toxic or low to moderately toxic solid and liquid aerosols having a concentration of up to 12 times
the TLV (threshold danger limit value) or 10 times the APF (assigned protection factor).
6 . Expiry date
If maintained as per storage instructions , products can be used up to 5 years from date of manufacture.
7 . FAQ
Q:Are you a manufacturer or a trading company?
A:We are a manufacturer located in Zhejiang,China. Welcome to visit our factory.
Q: Can you provide free samples?
A: All samples are provided freely, it will takes3-5 days to prepare the samples.
Q: How does your factory control the quality?
A: All manufacturing are absolutely base on the pre-production samples. Meanwhile, we have a complete after-sales system.
Q: Could you embossed printing the logo on the face mask?
A: Yes, we can embossed printing the logo on the surface of face mask, OEM production is ok.
Product Tags:
|
|
Anti Pollution FFP2 Mask Asbestos , FFP2 Face Mask With Built In Sponge Strip Device Images
|
